(615)-255-4810  |  Contact Us
Catalogs Order History & Status Invoices
0
My Cart $-.--
Shop by Category
Quick Order
0
Home Chemicals, Lubricants & Sealants 16 OZ CPVC CMNT FLOWGUAR GOLD LO-VOC 1 STEP

16 OZ CPVC CMNT FLOWGUAR GOLD LO-VOC 1 STEP

PART OAT 31912
SUPPLIER Oatey®
SUPPLIER PART # 31912
Calculating price...
QUANTITY

About this item

Oatey® FlowGuard Gold® CPVC Cement, 1-Step All Weather Low VOC Medium Body, 16 oz Container, For Use With: 2 in Dia Copper Tube/CPVC Hot and Cold Potable Water Pipe and Fittings, Yellow, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 1 or 6 hr Curing, 0 to 110 deg F

Oatey® FlowGuard Gold® 1-Step All Weather Fast Set Yellow Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. Its prevention formula is designed to help protect pipes from corrosion. Its medium body has excellent gap filling properties and is easy to apply with included in-lid dauber. This yellow, low VOC, fast set cement can be used to solvent weld copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

ASTM F493|IAPMO Listed|NSF 61 for PW|DWV and Sewer Waste
Color Yellow
Composition Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed
Container Size 16 oz
Curing Time 1 or 6 hr
Odor/Scent Solvent
Setting Time 4 to 5 min
Suitable For Use With 2 in Dia Copper Tube/CPVC Hot and Cold Potable Water Pipe and Fittings
Temperature Rating 0 to 110 deg F
Type 1-Step All Weather Low VOC Medium Body
Brand Oatey®
Country of Origin US
  • For cold water systems and hot water systems up to 200 deg F
  • May be used without primer where local codes permit
  • Recommended application temperature 0 to 110 deg F
  • FlowGuard Gold® is a registered trademark of The Lubrizol Corporation
  • Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength
  • Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
  • 7.98 +/- 0.2 lbs./gallon density
  • 1 hr Cold/6 hr hot water above 60 deg F curing
  • 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
  • Helps protect pipes from corrosion
  • Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
  • Approved for use with FlowGuard Gold® piping systems (registered trademark of Lubrizol Corporation)
  • No primer needed where local codes permit